50 kHz Omnidirectional Measure
Model: M50
The M Series has become the accepted standard for affordable, reliable reference and measurement microphones that are accurate in the time domain and frequency response. They are remarkably stable with respect to temperature and atmospheric conditions and are optimized for clean, very fast impulse performance providing accurate wideband response with virtually no handling noise.
Frequency Response: 3Hz to 50kHz ±1/-3dB
Polar Patern: Omnidirectional
Sensitivity: 30mV/Pa (-30.5dBV/Pa)
Max Acoustic Input: 142dB SPL
Noise: 22dB SPL equivalent (A weighted) MORE»
| List | $91.35 |
SR Series 30kHz Multi-Purpose
Model: SR30
Earthworks cardioid microphones have patented near-perfect cardioid patterns. The sound across the entire front hemisphere is remarkably uniform and is flatter at 90 degrees than most microphones are on-axis. The SR Series have an incredible transparent sound quality, offering near-perfect polar response and high rejection of sounds at the rear of the microphone, resulting in less leakage and more gain before feedback.
Frequency Response: 30Hz – 30kHz ±2dB at 6 inches (15cm)
Polar Pattern: Cardioid or Hypercardioid
Sensitivity: 10mV/Pa (-40dBV/Pa)
Power Requirements: 48V Phantom, 10mA
Max Acoustic Input: 145dB SPL
Output: XLR (pin 2+)
Output Impedance: 100 , balanced (50 ea. pin 2 & 3)
Min Output Load: 600 between pins 2 & 3
Noise: 22dB SPL equivalent (A weighted)
Dimensions L x D: 212mm x x 22mm (8.4 x .860 inches)
Weight: .5 lb (225g) MORE»
| List | $28.98 |
Cardioid Dynamic USB/XLR Micro
Model: AT2005USB
Building on the heritage of the renowned 20 Series line of studio microphones, Audio-Technica’s new AT2005USB is an all-purpose microphone designed to take you from the stage to the studio and beyond. This rugged handheld microphone offers two outputs, USB output for digital recording, and an XLR output that connects with a sound system’s conventional microphone input for use in live performance. The microphone plugs right into your computer’s USB port, and functions seamlessly with your favorite recording software.
The AT2005USB also offers a quality analog-to-digital converter for excellent fidelity, and a headphone output with level control for monitoring. Its cardioid polar pattern reduces pickup of unwanted sounds from the sides and rear. The microphone is ideal for live performance, podcasting, home studio recording, field recording, and voiceover use.
ELEMENT: Dynamic
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 50-15,000 Hz
POWER REQUIREMENTS: USB Power (5V DC)
BIT DEPTH: 16 bit
SAMPLE RATE: 44.1 kHz/48 kHz
CONTROLS: On/off Switch;
Headphone Volume Control
WEIGHT: 266 g (9.4 oz)
DIMENSIONS: 183.6 mm (7.23") long,
51.0 mm (2.01") maximum body diameter
OUTPUT CONNECTOR: USB-type/XLR-type
HEADPHONE OUTPUT POWER: 10 mW at 16 ohms
HEADPHONE JACK: 3.5 mm TRS (stereo)
SYSTEM REQUIREMENTS: Macintosh: MAC OS X; USB 1.0 or 2.0; 64 MB RAM (minimum)
Windows: XP/Vista/Windows 7; USB 1.0 or 2.0; 64 MB RAM (minimum)
ACCESSORIES FURNISHED: Stand clamp for 5/8"-27 threaded stands; tripod desk stand; 6.6' (2 m) mini USB cable, 9.8' (3 m) XLRF-type to XLRM-type cable MORE»
| List | $89.00 |
Cardioid Condenser Handheld Mi
Model: AT2010
The AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica’s renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.
ELEMENT: Fixed-charge back plate permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 40-20,000 Hz
OPEN CIRCUIT SENSITIVITY: –48 dB (3.9 mV) re 1V at 1 Pa
IMPEDANCE: 100 ohms
MAXIMUM INPUT SOUND LEVEL: 136 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical:) 113 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 71 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 48V DC, 2 mA typical
WEIGHT: 233 g (8.2 oz)
DIMENSIONS: 179.1 mm (7.05") long,
50.8 mm (2.00") maximum body diameter
OUTPUT CONNECTOR: Integral 3-pin XLRM-type
ACCESSORIES FURNISHED: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch MORE»
| List | $119.00 |
Side-Address Cardioid Condense
Model: AT2020
Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.
ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 20-20,000 Hz
OPEN CIRCUIT SENSITIVITY: –37 dB (14.1 mV) re 1V at 1 Pa
IMPEDANCE: 100 ohms
MAXIMUM INPUT SOUND LEVEL: 144 dB SPL, 1 kHz at 1% T.H.D.
NOISE: 20 dB SPL
DYNAMIC RANGE (typical): 124 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 74 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 48V DC, 2 mA typical
WEIGHT: 12.1 oz (345 g)
DIMENSIONS: 6.38" (162.0 mm) long,
2.05" (52.0 mm) maximum body diameter
OUTPUT CONNECTOR: Integral 3-pin XLRM-type
ACCESSORIES FURNISHED: Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch MORE»
| List | $119.00 |
USB Cardioid Condenser Microph
Model: AT2020USB+
Equipped with a USB output, the AT2020USB+ is designed for digitally capturing music or any acoustic audio source using your favorite recording software. The microphone offers the critically acclaimed, award-winning sound of the AT2020, with studio-quality articulation and intelligibility perfect for singer/songwriters, podcasters, voice-over artists, field recorders, and home studio recorders.
The AT2020USB+ features a built-in headphone jack with volume control that allows you to directly monitor your microphone signal with no delay. It also offers mix control that blends microphone and pre-recorded audio. The microphone’s cardioid pickup pattern delivers excellent off-axis rejection, while its A/D converter with a 16-bit, 44.1/48 kHz sampling rate ensures extremely articulate sound reproduction.
Audio-Technica’s state-of-the-art design and manufacturing techniques ensure that the microphone complies with the company’s renowned consistency and reliability standards.
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 20 – 20,000 Hz
POWER REQUIREMENTS USB Power (5V DC)
BIT DEPTH 16 bit
SAMPLE RATE 44.1/48 kHz
VOLUME CONTROL Mix control;
Headphone volume control
WEIGHT 386 g (13.6 oz)
DIMENSIONS 162.0 mm (6.38") long,
52.0 mm (2.05") maximum body diameter
OUTPUT CONNECTOR USB-type
HEADPHONE OUTPUT POWER 130 mW (at 1 kHz, 10% T.H.D., 32 ohm load)
HEADPHONE JACK 3.5 mm (1/8") TRS (stereo)
ACCESSORIES FURNISHED Pivoting stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable
MORE»
| List | $169.00 |
20 Series Cardioid Condenser I
Model: AT2021
Ideal for home studio and live applications, the low-profile AT2021 offers an extended frequency response, high maximum SPL and wide dynamic range. The microphone is outstanding for acoustic guitar, overheads, piano and group vocals. Its low-mass element offers a superb transient response.
ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 30-20,000 Hz
OPEN CIRCUIT SENSITIVITY: –39 dB (11.2 mV) re 1V at 1 Pa
IMPEDANCE: 250 ohms
MAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.
NOISE: 19 dB SPL
DYNAMIC RANGE (typical): 126 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 75 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 48V DC, 2 mA typical
WEIGHT: 83 g (2.9 oz)
DIMENSIONS: 101.5 mm (4.00") long,
21.0 mm (0.83") maximum body diameter
OUTPUT CONNECTOR: Integral 3-pin XLRM-type
ACCESSORIES FURNISHED: Stand clamp; soft protective pouch MORE»
| List | $89.00 |
Cardioid Condenser Microphone
Model: AT2035
Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.
ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 20-20,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY: -33 dB (22.4 mV) re 1V at 1 Pa
IMPEDANCE: 120 ohms
MAXIMUM INPUT SOUND LEVEL: 148 dB SPL, 1 kHz at 1% T.H.D.;
158 dB SPL, with 10 dB pad (nominal)
NOISE: 12 dB SPL
DYNAMIC RANGE (typical): 136 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 82 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 11-52V DC, 3.8 mA typical
SWITCHES: Flat, roll-off;
10 dB pad (nominal)
WEIGHT: 403 g (14.2 oz)
DIMENSIONS: 170.0 mm (6.69") long,
52.0 mm (2.05") maximum body diameter
OUTPUT CONNECTOR: Integral 3-pin XLRM-type
ACCESSORIES FURNISHED: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch MORE»
| List | $149.00 |
Multi-pattern Condenser Microp
Model: AT2050
The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.
ELEMENT: Externally-polarized (DC bias) condenser
POLAR PATTERNS: Cardioid, Omnidirectional, Figure-of-Eight
FREQUENCY RESPONSE: 20-20,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY: –42 dB (7.9 mV) re 1V at 1 Pa
IMPEDANCE: 120 ohms
MAXIMUM INPUT SOUND LEVEL: 149 dB SPL, 1 kHz at 1% T.H.D.;
159 dB SPL, with 10 dB pad (nominal)
NOISE: 17 dB SPL
DYNAMIC RANGE (typical): 132 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 77 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 11-52V DC, 4.7 mA typical
SWITCHES: Polar selection;
Flat, roll-off;
10 dB pad (nominal)
WEIGHT: 412 g (14.5 oz)
DIMENSIONS: 170.0 mm (6.69") long,
52.0 mm (2.05") maximum body diameter
OUTPUT CONNECTORS: Integral 3-pin XLRM-type
ACCESSORIES FURNISHED: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch MORE»
| List | $229.00 |
